Step 01
Direct-to-film printer, 30 inches
Prints a transfer that presses onto any fabric in any color — cotton included, which is what older apparel methods could not do without pre-treating.
DetailsProduction line
Apparel
Print the transfer, press it, ship it.
Four stations that cover shirts, hoodies, hats and oversized pieces without sending anything out. A direct-to-film printer handles any fabric in any color, a dye-sublimation printer covers polyester and hard blanks, and three presses finish the job.
Step 02
Dye-sublimation printer, 42 inches
Prints onto transfer paper for pressing into polyester and coated blanks.
DetailsThe equipment that finishes the job
16" × 20" heat presses, on stands ×2
Stahls Hotronix Fusion IQ
Air-operated and auto-opening, so the platen lifts itself the moment the timer ends — no standing over it, and no scorched garments if you step away. Two stations means one loads while the other presses. Eight interchangeable platens come with them, including sleeve and sock.
44" × 64" twin press, top and bottom heat
Geo Knight MAXI Press Air, top & bottom heat, 200A
The one that handles what a 16×20 cannot — all-over prints, blankets, banners, tote panels and oversized transfers. Twin shuttle means one bed loads while the other presses, and heat from above AND below means thick or layered pieces cure evenly instead of just on the face.
Direct-to-film shaker oven
DTF SUPERSTORE
The half of the DTF process people forget to budget for. It shakes adhesive powder evenly across the wet print and cures it in one pass, which is what makes a transfer bond properly and survive washing. Without it, a DTF printer is only doing half a job.
Also on this line
- Two Hotronix Fusion IQ 16" × 20" presses with rolling stands
- Hotronix 360 IQ cap press for curved crowns
- Geo Knight MAXI Press 44" × 64" twin, top and bottom heat
- Direct-to-film shaker oven
- Eight interchangeable platens including sleeve and sock
- Shop air compressor — both Fusion IQ presses run on air
- 315 blank garments included