Step 01
Flatbed UV printer, 4ft × 8ft bed
The machine that prints straight onto the thing itself.
DetailsProduction line
Signage & large format
Roll, rigid and everything cut to shape.
A 64-inch roll printer and a 4ft × 8ft flatbed cover every substrate a sign shop touches, and two cutters turn printed sheets into finished shapes. Between them they produce banners, wraps, rigid panels, window graphics and gallery canvas.
Step 03
Flatbed cutting table, fully tooled
Cuts any shape out of flat material, following the printed artwork exactly.
Details
Step 04
Roll cutter, 54 inches
Cuts letters and shapes out of a roll without printing anything.
Details
Step 05
Fine-art and photo printer, 44 inches
Built for color that holds up under gallery lighting, on canvas and heavy art paper.
DetailsThe equipment that finishes the job
65" roll laminator
Kala 1650 - 65” - ARKANE
Seals and protects everything off the roll printer. It is the step that turns a print into something that survives weather, washing and handling — and it is what lets you sell exterior work with a straight face.
96" × 48" flatbed laminator
Kala APPLIKATOR 2600
Mounts prints onto rigid board without bubbles or lift. This is how a printed sheet becomes a sign: flat, square and ready to cut.
Board cutter and V-groover
Safety Speeds SSC - MULTI SUBSTRATE CUTTER & VGROOVER
Cuts full sheets of board, acrylic and aluminum down to size, then V-grooves them so a panel folds to a clean edge instead of being mitred by hand.
Also on this line
- Kala Arkane 1650 roll laminator, 65 inches
- Kala Applikator 2600 flatbed laminator, 96" × 48"
- Safety Speed board and panel cutter with V-groover
- Full Summa tool set — router, tangential knife, oscillating, V-cut
- Electric grommet machine for banner finishing
- 18 rolls of media and 417 rigid panels included